Error codes for Cabrio Washer

As a leading manufacturer of household appliances, Whirlpool has developed several products that are aimed at providing the users with a better quality of life. One of the products that Whirlpool has designed is the Cabrio Washer. This washer is designed to wash clothes with a gentle spin and quick cycle. It is one of the best washers in its category and has been praised by many users for its ability to provide quality cleaning.

The design of this washer is also appealing to most people. It features a sleek black finish that makes it look like a luxury appliance. It comes with several options such as steam and water level sensing that make it easy for you to set your preferences. This allows you to get an excellent clean every time you use it. The best part about this washer is that it can fit into almost any type of space since it is compact and easy to install.

However, there are also some common issues that homeowners have with their Cabrio Washer editions that can lead to inconvenient situations and even expensive repairs. The purpose of this article is to provide a comprehensive guide on how to identify these common issues so that you can be able to solve them quickly and effectively. Let’s check out some of the common problems and their possible solutions.

LF (F30)

Full of long fill. LF flashes when the water level does not change for a period of time after the valves have been turned on. If the water has left the drum and the control panel has not detected a water level change.

Does it look like the water supply is connected and turned on?

Are the hose screens plugged?

Is water in the tub?

If that is the case, check the connection of the pressure hose to the machine or motor control.

uL (none)

Unbalanced load. uL is shown by the machine/motor control when it detects that the load is off-balance. It stays on when the washer runs a mini-cycle to rebalance the load.

If the mini-cycle is able to rebalance the loads, the display shows that it is clear that it has successfully been done.

If the mini-cycle is unsuccessful, it will flash until the lid is opened, so that the customer can see what it has loaded and may redistribute the load.

oL (F70)

That means that the washing machine is overloaded. It flashes when the washer/motor control detects that the washer’s capacity is greater than the load size.

Open the lid to clear the washing station and remove any excess laundry. Then, restart the cycle.

Sd (F71)

Sud detection is an important thing. On these screens, Sd appears when the machine/motor control detects that there is a drag on the basket and detects that there is a suds-lock condition. The control panel should remain on until the control runs a mini clean-out cycle. If the cycle is unable to correct the excess suds, it will end, and there will be a sd flash in the display.

This can indicate excessive detergent use, or that the basket cannot engage during the drain step. Or, that there is mechanical friction on the drive mechanism preventing the basket from engaging.

(Visited 3 times, 1 visits today)


  • No comments yet.
  • Add a comment