Error codes for LG Washer

LG is a brand of products that has been around for some time. LG has been making and designing a variety of products since its establishment. LG is known for providing quality products and services to its customers. It is one of the leading manufacturers of household appliances in the United States.

LG has also designed its washers for maximum efficiency and durability. This makes it one of the most reliable brands in the industry. LG is known for manufacturing a wide range of appliances, including refrigerators, ranges, freezers, TVs, even air conditioners and mobile phones.

However, there are also some common issues that homeowners have with their LG washers. These issues can lead to dangerous situations and even expensive repairs. The purpose of this article is to provide a comprehensive guide on how to identify these common issues so that you can be able to solve them quickly and effectively. Let’s check out some of the common problems and their possible solutions.

FE Error Code

The washer is overflowing. When this happens, it is usually due to a faulty water valve. Parts that are likely to fail are the water valve inlet assembly.

Close both the water taps. When you drain any water that you can drain out, turn the washer back on. Press the spin button until there is no spin, and press the start/pause button to start spinning. Once the washer is drained, you can start the washing cycle again. If the error code continues to be displayed, the unit will require that a professional service is called to it.

OE Error Code

It is possible that the drain hose is kinked or clogged.

If you notice that there is an obvious kink in the drain hose, straighten the hose and that should solve the problem. If it does not clear the error code, it may be that there is a clog in the hose. If you can find any of those clogs, try to remove the clog from the hose. If none of these two remedies fix the problem, it is possible that it is caused by a faulty drain pump.

IE Error Code

The washing machine cannot fill with enough water for the load.

Or perhaps the drain hose was installed incorrectly. If your supply taps are closed, it may be because your inlet hose is kinked or damaged. It could also be that there were clogged inlet filters.

First, you should check for a blocked inlet filter. If that does not work, make sure that your drain hose is correctly installed, and the water in your supply taps are open.

UE or UB Error Code

An unbalanced load.

It is time to stop the machine and open the door. When the drum is full, move the clothing inside the drum so that the load is as evenly distributed as possible.

CL Error Code

It is possible that the CL error code is not actually an error code. It is a message to tell you that the child safety lock has been activated.

Touch the button that is on the child lock and hold it in place for at least 3 seconds. So do that to clear the code and allow you to continue using the washing machine. If this doesn’t work, it’s possible that the problem is a mechanical one, so it may be best to request a visit from the repairmen.

(Visited 4 times, 1 visits today)

Comments

mood_bad
  • No comments yet.
  • Add a comment