Error codes for Maytag Washer

Maytag is a brand of household appliances from Whirlpool Corporation. It is one of the most reputable companies in the United States. The company has been manufacturing household appliances for over a century. This makes it one of the most experienced manufacturers of home appliances in the country.

The company has a long history of providing great products and service to its customers. Since its establishment, Maytag has been creating and designing a variety of products that will provide you with the best services and performance. Maytag is known for providing a wide range of products, including washing machines, dryers, dishwashers, and more.

However, there are also some common issues that homeowners have with their Maytag appliances. These issues can lead to dangerous situations and even expensive repairs. The purpose of this article is to provide a comprehensive guide on how to identify these common issues so that you can be able to solve them quickly and effectively. Let’s check out some of the common problems and their possible solutions.

Tech Support 24/7
Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

LOC or LC

The lock has been activated. Touch the button that activates the lock or (on older models) verify the button by reading the owner’s manual to determine which button activates the lock. Several models, some of which you must press and hold, have buttons that you have to press and hold.

dET

There is no detergent cartridge in the dispenser. As long as you are using single-load doses of detergent, you should ignore this message. Make sure that the dispenser cartridge is inserted correctly, and that the dispenser drawer is shut completely.

Int

It was paused or cancelled. It is possible that the washer takes 20-30 minutes to stop spinning and draining, and it is possible that this error code is displayed during that time.

If you want to get rid of the code, press the pause or cancel button twice, and press the power button once. If the code is still displayed, unplug the washer from your circuit, or disconnect the power to the washer for one minute.

rL or F34

There were tems that were spotted in the washer during the clean washer cycle.

Tech Support 24/7
Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

Take items out of the drum and restart the wash cycle.

Sud or Sd

You can see that too many suds are in the washing machine. When it is impossible to rinse out the excess suds, the washer will not be able to spin out any of the water. When there is a sud or sd displayed, the washer automatically extends the rinse time, in order to remove the excess suds. During that time, the washer pauses the tumbling and adds water to the tank in order to rinse it more. When the pause is reached, the bubbles in the suds in the liquid can break. So the pause and rinsing are necessary and may occur several times in order to get rid of the suds.

Make sure to use a detergent that is high efficiency. If you use no splash or easy pour liquid chlorine bleach, there could be a risk that you will have too many suds. It is possible that this type of liquid chlorine bleach contains a thickening agent, which may cause excessive suds in washers. If that is the case, then run the washer with the bleach.

(Visited 20 times, 1 visits today)

Comments

mood_bad
  • No comments yet.
  • Add a comment
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]