Omron is a company that is known for being one of the most popular home blood pressure monitors. The company was founded in 1924 and it is based in Kyoto, Japan. Omron offers a variety of different products, including blood pressure monitors, ECG monitors, thermometers and other medical devices. These products are available online or through retail stores in different countries around the world.
If you are having issues with your Omron blood pressure monitor or if you encounter errors while using your home medical devices, then you might encounter error code on the device. This error can occur when there is a failure on the device. Further information about the error codes, here are some error codes on Omron’s blood pressure monitor and how to fix it.
Err means that the pressure of blood is not stable because of the fresh movements that may occur during the measurement. So try again and make sure that you stay still and silent while measuring. You should have your systolic and diastolic pressures within 10 mmhg of each other.
The Err might show because of a problem with the device system. Pull out the batteries, and press the power button. After that, you can put the batteries on again. So, if you continue to see this error, please contact our support team.
Err CUF slangs for “unperfectly cuffed” and “too loose”. When you take the cuff off, put it on, making sure it fits correctly. In the next step, make a few small holes between your cuff and the arm. When you see an E-Code, that means that your monitor can not detect the pulse correctly.
Err 9-There’s a problem with the battery system. Take out the batteries, press the power button and put the batteries back. If you are still seeing this error, contact us to get help.
Err 10/11-The monitor does not connect properly to the device. Check the connection and plug it properly to the device. If it still happens, you can change the cuff with the new one. The problem might happen on the wire connection.
Er 5/Er 6 Error with the connection. The best way to fix it is by checking the connection between the cuff and the device. Make sure it is connected properly.
Err 7 -Internal device error. The batteries are at a low level. Replace the batteries and try again. If you still have this error, contact us to see if we can help you.
If you have questions about Omron products, you can contact us directly. The customer support is available 24 hours.