Error codes for One Touch Verio Flex

The contents of the Errorwise.com website, such as text, graphics, images, and other material contained on this site (“Content”) are for informational purposes only. The Content is not intended to be a substitute for professional medical or contacting the manufacturer. Always seek the advice of your doctor with any questions you may have regarding your medical condition. Never disregard professional advice or delay in seeking it because of something you have read on this website!

One Touch Verio Flex is a blood glucose monitor brand by LifeScan IP Holdings, LLC. It is available in different price ranges and it is known for being a high-quality product. It can measure glucose level from a compact device.

One Touch Verio Flex is one of the most popular products on the market today and there are several models that are available for purchase. However, this device has several errors that might occur when you try to use this product. One of the most common errors that might occur with this product is error code that appears because of the problem in power supply.

Tech Support 24/7
Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

This error can occur when there is an issue with your power supply or it can occur when there is an issue with your device’s internal hardware components. This error can also occur if other applications are interfering with the proper functioning of One Touch Verio Flex. Here are some codes and the best way to fix it.

Error Codes: Lo

You may have very low blood glucose levels, so severe hypoglycemia is induced. Your glucose level may be below 20 mg/dl. When your blood sugar results are below 20 mg/dL, the metre screen displays both the low and high readings, and the range indicator arrow also flashes on the screen.

This needs to be treated immediately. While this is not a message that you are trying to catch by a test error. You better do another test. Always follow the advice of your healthcare provider.

Error Codes: Hi

Hi code appears when you have a very high blood glucose level. It is possible that you have a top level of blood glucose (severe hyperglycemia) that is over 600 mg/dl.

When the glucose result is greater than 600 mg/dl, the red light and red arrows that show the difference between the high and the range on the metre screen will flash.

Tech Support 24/7
Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

So, you may need to test your blood glucose level again. If your result is hi again, then you need to get the attention and direction from the professional as soon as possible.

Error Code: Hi.t

Error code Hi.t means there’s a problem with the device;s temperature. Metre that might be too hot. It is possible that the metre was too hot (above 104°f) to conduct a test.

What you need to do is pull out the device battery  and the strips of testing to a cooler area. Insert a strip when the reading temperature is between 50 to 104°F. If you do not get another Hi .t message, you can proceed with testing.

Metre too cold. Some people think metres are too cold (below 50°F) to test. When the weather gets colder, move the strips to a place that is warmer. Insert a new test strip when the reading on the metre and the test strips are in the range that will operate between 50 and 104°F.

When you still see the problem on your device, you can ask the technician for more help. You might have to change some parts with the new one.

(Visited 32 times, 1 visits today)

Comments

mood_bad
  • No comments yet.
  • Add a comment
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]