Error codes for Pit Boss Smoker

Pit Boss is a manufacturer that makes a variety of pellet smokers that can be used in the home. Pit Boss makes a variety of different types of smokers, including grills and smokers. Pit Boss smokers are very versatile, and they can be used to cook a variety of different types of food.

Pit Boss smokers are very versatile, and many of them offer many different features, such as being able to control the cooking temperature and having a windscreen to protect your food from being damaged by the smoke. Pit Boss smokers are very easy to use, and you can easily change the settings to fit your needs.

Smokers from Pit Boss can produce several error codes that will cause different types of problems. Error codes are common with many different kinds of Pit Boss smokers. They can cause all sorts of different problems. We’ll give you some tips on how to fix them.

Tech Support 24/7
Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

Er2

Er2 codes appear only if your smoker fails to reach a temperature of 160 °F or higher within the first half hour of starting up.

ErH

It can cause problems with the grill probe that detects when the meat is cooked. If you have an issue with the probe, it could be that there is too much fuel or that your smoke may cause a fire. In order to clear this error code, you should shut down the unit and then start cooking your food. After you turn off the appliance, you will need to disconnect the wiring that connects the grill to your wall.

ErP

When your barbecue grill flashes an error code, there is nothing that you need to panic about. The problem is that you can easily reset the code, and if you do that, the problem will be fixed. This problem is very common, and it is very easy to fix. This error code means that you did not shut off your Pit Boss properly.

When this error code is thrown up, it indicates that the power to the pit boss was cut because there was a power outage. You might have accidentally turned off the power to a wall socket without first making sure that the electric barbecue was shut off. Fortunately, you can easily fix this problem by simply turning off your pellet smoker. Simply press the power button on the smoker to start it.

Nop

This code is related to the probe that detects if there is any meat in the smoker. Use the probes to read the internal temperature of the meat that you are cooking.

Tech Support 24/7
Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

The simple solution to this problem is to make sure that the probes that allow you to measure the temperature of your meats are connected correctly. If they are connected properly, you should not get an error code. You may need to replace the probes.

4P1

If you see this error message, it means that your control board is no longer communicating with the device. It is very likely that your control board has been damaged.

You should be able to use your Pit Boss pellet grill for a while, but unfortunately the control panel for the pellet grill will not display any of your settings properly. It can be fixed by either replacing the control board or having it professionally looked at.

(Visited 28 times, 1 visits today)

Comments

mood_bad
  • No comments yet.
  • Add a comment
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]
    [class^="wpforms-"]