Error codes for Volvo Trucks

Volvo trucks are some of the most reliable and durable trucks on the market. They are known for their sleek designs and high quality construction. It was founded in 1927, and has since become one of the world’s leading truck manufacturers. Many of their trucks are used by commercial trucking companies all over the world. You can find Volvo trucks in a variety of different styles and sizes, perfect for any application.

However, like any other vehicle, Volvo trucks can experience mechanical problems. And, because they are so popular, there are a variety of error codes that can be associated with them.

P011001

The code P011001 means there is a general electrical fault. It can happen when there is a short circuit in the electrical system, or when there is a problem with the battery. The solution is to check the voltage and the current flow in the electrical system. If there is a problem, then you will need to replace some components.

Tech Support 24/7
Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

P019511

The code P019511 means there is a problem with the engine. This can be due to a number of different reasons, including a faulty ignition coil, a bad oil seal, or a worn piston ring. In most cases, this will require replacement of the engine.

P049D99

The code P049D99 means there is a parameter limit exceeded. This can happen when the engine exceeds the maximum power output or the maximum speed that the truck was designed for. The solution is to check the engine parameters and reset them if necessary.

P052064

The code P052064 means there is a violation of signal reliability. The code can indicate that there is a problem with the transmission, the axle, or the brakes. The solution is to check all the components for signs of wear and tear, and to repair or replace any that are necessary.

P06279C

The code P06279C means the fuel pump control “A” is low or has an insufficient flow. This can happen when the pump is not receiving enough fuel from the tank, or when there is a problem with the fuel injectors. Also, the fuel pressure can be low, which can lead to the code. The solution is to check the fuel pressure and the fuel lines if there is a problem.

P009B73

The code P009B73 means the fuel pressure relief control and the actuator jammed in the closed position. It can be caused by a build-up of sludge or sediment in the fuel system, which can block the pressure relief valve. The solution is to clean the fuel system and to replace the fuel pressure relief control if necessary.

Tech Support 24/7
Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

P100712

The code P100712 means the air filter indicator is circuit short to battery voltage. This can happen when the air filter becomes clogged, and the engine tries to use too much power to clear the filter. You can try to clear the filter yourself, or you can have a professional do it.

Meanwhile, you may also experience other error codes while driving your Volvo truck. These codes will indicate specific problems with the vehicle, and will usually require a trip to a mechanic to fix them. But, by knowing what these codes mean, you can easily address any issues that arise.

(Visited 40 times, 2 visits today)

Comments

mood_bad
  • No comments yet.
  • Add a comment