Beko is a company that produces home appliances such as washers, dryers, ovens, refrigerators, and other products. Beko was founded in the year 1955 and it is based in Turkey. The company’s headquarters are in Istanbul, Turkey.
Beko appliances are available through retail stores and they are also available online through various retailers.
We can find Beko washers and dryers in different price ranges. The company offers different products to suit different needs and requirements of customers.
In addition to these products, Beko also offers other products, such as ovens, refrigerators, ranges, and dishwashers. These products are available through retail stores or online via retailers such as Amazon or eBay.
On this page, you will find more information about the most common causes and most relevant solutions for the Washer & Dryer error 'E10'. Do you need help straight away? Visit our support page.
The Beko documentation indicates that error code 'E10' is caused by the following problem: "Door is jammed".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this Washer & Dryer problem yourself. Do you need more help? Visit our support page if you need professional support with Washer & Dryer right away.
To fix this error, you need to try a few solutions.
Option 1: Check for any leaking.
You need to check for any leaking of the washer. If there is any, then you need to take action. You must clean the drain pump filter first before doing anything else. To do this, you need to unscrew the cap of the filter and clean it with a wet cloth.
If you find the drain pump filter is clogged, then you need to replace it with a new one.
Option 2: Clean the level switch.
You also need to check for any leaking in the washer. If there is any, then clean it using a wet cloth and make sure that you remove all the dirt and dust that has accumulated on it. You also need to remove all the debris from the valve.
To do this, simply take out all of its parts and remove them from your washer. You also need to wipe off all of its parts with a dry cloth so that they are clean and ready for use again. Once this is done, then place them back into your washer.
You also need to turn on your washer before doing anything else, since this will ensure that it is ready for use again when needed.
Option 3: Clean the drain pump filter.
If you want to make sure that your washer works well, then you need to clean the drain pump filter first. To do this, you need to remove the cap of the filter and clean it with a wet cloth. Once this is done, then place it back into your washer and turn on your washer.
If you find that there is no leaking after this, then you can use it again.