Dexter Washer & Dryer error F16

Dexter also offers security systems and lighting products. These products are available online or through retail stores in different countries around the world. If you are having issues with your Dexter product or if you encounter errors while using your home appliances, then you might encounter error code F16 on your device’s screen. This error can occur when there is an issue with your device or it can occur when there is an issue with your power supply.

The control unit detects when the internal temperature is too high. If this occurs, stop using the machine and let it cool completely. In these situations, stop the machine and stop the washing cycle completely. If the machine won’t stop moving, lock the door and wait until it stops moving. Then unlock the door.

It is important to check that the fins in the cooling unit are in good condition. Make sure that the heat sink and the ventilation louvers on the rear of the VFD cooling fan are clean. Start a wash cycle and make sure the fan in your washing machine operates when the cylinder starts turning.

If it occurs when closing the door, this error code can also mean the door is open, or that you have not closed it properly. If this happens, it is possible that something is obstructing the washer or dryer door, causing it to get jammed. Please close the door and go back to your machine as usual. If you still get this error message even after closing the door, please make sure the door is properly closed.

The cooling fan can be used to test the machine if it occurs when opening the door. Make sure that the fins in the cooling unit are in good condition. Start a wash cycle and make sure that the fan in your washing machine operates when the cylinder starts turning. You can also test the heating element in your dryer.

It's also possible that the electrical connection is not connected properly. Try starting a wash cycle and make sure that the fan in your washing machine operates when the cylinder starts turning. If it still occurs, then you can try to restart your washer or dryer by unplugging it for 10 seconds and plugging it back in.

Overall, if you encounter this error code on your washer or dryer, it means that the electrical connection is not connected properly. Make sure that the connection is secure and try restarting your machine by unplugging it for 10 seconds and plugging it back in. If the problem still occurs, then you need to contact a technician to fix this issue. Make sure you also get into contact with a Dexter representative for customer service so you can get the right advice.