The Electrolux Company is a home appliances manufacturer that was founded in 1919. The company is known for being one of the leading companies in the appliance industry. Electrolux is an international company and it has a wide range of products such as refrigerators, freezers, dishwashers, ovens, washers, and dryers.
If you are having issues with your Electrolux product or if you encounter errors while using your home appliances, then you might encounter error code E41 on your device’s screen. This error can occur when there is an issue with your device or it can occur when there is an issue with your power supply.
Tech Support 24/7
Ask a Tech Specialist Online
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
On this page, you will find more information about the most common causes and most relevant solutions for the Washer & Dryer error 'E41'. Do you need help straight away? Visit our support page.
Let's get started
It has never been easier to solve error "E41".
View list of solutions Contact an expertError information
-
Category
-
Error codeE41
-
ProductWasher & Dryer
-
DeveloperElectrolux
-
First seenSeptember 6, 2021
-
VerifiedYes
What causes the E41 error?
The Electrolux documentation indicates that error code 'E41' is caused by the following problem: "Door open (after 15 sec) Door interlock faulty; wiring faulty; PCB faulty".
Do you think there is another cause for this error? Let others know in the comments.
How to solve Electrolux Washer & Dryer error E41
We've created a list of solutions which you can follow if you want to solve this Washer & Dryer problem yourself. Do you need more help? Visit our support page if you need professional support with Washer & Dryer right away.
Tech Support 24/7
Ask a Tech Specialist Online
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
Verified solution
Sometimes, common device errors or server problems can also cause this error.
To fix this error, you need to try a few solutions.
- Check any knotted or frozen drain pipe
- Restart the drain program
- Make sure the water level is not too high or too low
- Replace any faulty hose or brand pipe
One possible solution you can try is to check any knotted or frozen drain pipe. The following instructions will help you in removing any knotted or frozen drain pipe.
Step 1: Unplug your device and remove the power cord from the electrical outlet.
Step 2: Turn off the water supply to your device by turning off the valve on the wall of your home. The valve should be located in a corner of your home. You can find it by turning off all water valves in the home.
Step 3: Place a bucket under the sink and turn on the cold water tap in your sink. You can use a pair of pliers to remove any blockage if you find one on your pipe while doing this step. Turn on only one cold water tap at a time until you have removed all blockages from the pipes in your home.
You might want to place some plastic containers under some taps to catch any drips that might occur when you turn them on for this purpose. Once you make sure there is no damaged drain hose, restart the drain program.
Make sure the water level is not too high or too low inside the washer and dryer unit.
If there are damaged faulty hoses, locate a plumber who has experience with this kind of repair work and ask him to come over to fix your device. Make sure that he is qualified for this type of work and that he has access to all necessary tools for this repair work.
This repair will take some time, so you need to be patient.
Have you found a solution yourself, but it is not in the list? Share your solution in the comments below.
