The Electrolux E66 error occurs when you try to use your washer or dryer. This error is caused by a problem with your machine’s power supply. In most cases, this error can be caused by a loose or broken power cord.
This can be fixed by unplugging the appliance and removing the power cord from the outlet. Once you have removed the power cord, you need to replace it with a new one.
On this page, you will find more information about the most common causes and most relevant solutions for the Washer & Dryer error 'E66'. Do you need help straight away? Visit our support page.
The Electrolux documentation indicates that error code 'E66' is caused by the following problem: "Heating element power relay faulty (incongruence between sensing and relay) PCB faulty".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this Washer & Dryer problem yourself. Do you need more help? Visit our support page if you need professional support with Washer & Dryer right away.
Sometimes, an issue with your washer or dryer itself might cause the problem. If this is the case, then you will need to contact an authorized service center and have them fix your appliance for you.
Before you do that, however, you can try a few solutions.
Option 1: Reduce the detergent.
This is a simple solution to this error. If you are using too much detergent, then it will cause your washer to stop working. So, you need to reduce the amount of detergent that you are using in your machine. You can do this by following these steps:
Option 2: Replace the motor.
If replacing the motor does not work for you, then there is a possibility that an issue with your machine’s power supply (PSU could cause it).
This PSU powers all of your appliance’s components, including its motor, pump, and fuse box, which will all be affected by this error. So, if this is the case, then you will need to replace your PSU. To do this, follow these steps:
Option 3: Replace the heater.
A faulty heater can be easily replaced. First, unplug your washer or dryer from the power source and remove all of its components.
Then, turn off the power supply to your appliance and remove it from the outlet by unscrewing it or removing its fuse. You can remove it yourself or take it to an authorized service center and have them fix it for you.
Note: If your washer or dryer does not turn on at all, then you will need to contact Electrolux for help on how to fix this error. They will assist you in finding out what the problem is so that you can use your appliances again.