Electrolux is a well-known appliance manufacturer that was founded in 1919 and is one of the major players in the European market. It produces a number of different home appliances, including dishwashers.
Electrolux offers many different home appliances for sale on its website. There are many different models that they offer. There are many different Electrolux home appliances that are sold around the world. But if you try to use an Electrolux appliance, you may get an error code I44 displayed on your screen.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
On this page, you will find more information about the most common causes and most relevant solutions for the Dishwasher error 'i44'. Do you need help straight away? Visit our support page.
The Electrolux documentation indicates that error code 'i44' is caused by the following problem: "Pressure sensor signal too low".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this Dishwasher problem yourself. Do you need more help? Visit our support page if you need professional support with Dishwasher right away.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
If an error occurs, you will need to take a few simple steps to try and get the error code fixed:
Dirty filters can cause the water to not flow as smoothly, leading to unsatisfactory dishwashing results. Check and clean your filters regularly. You can find detailed information on cleaning and maintaining your machine in the user manual.
Reset your appliance. It is necessary that you reset all the settings that are on your machine. If the problem persists, try to remove the plug from the dishwasher and wait one minute before putting the unit back in place. You can also turn off the power by changing the fuses on the power switch or the panel that controls the water supply.
If you have pulled out your dishwasher and then pushed it back into its place, check that nothing has been cut or damaged and that the water tap is completely open. Turn on the dishwasher and choose a suitable cycle before you start it. If the washing cycle begins and runs smoothly, then the error code is corrected.
Check whether you are getting the same error message or whether it has changed. If you see a different error code, try checking the code in the instruction manual to get further guidance on how to fix the problem.
If you keep your dishwasher clean, it will ensure that the wash motor functions properly and other parts of the machine work correctly. This will ensure that the water flows smoothly and there is no build-up of debris in the water. This will save money by reducing the need for replacing any parts. Ensure that you clean your dishwasher after every wash cycle.
Pay attention to a faulty temperature gauge that may be present in your machine. When you turn on your dishwasher, make sure that it has a set temperature for every cycle to ensure that it is not faulty.
Check that your drains work properly to prevent any damage to the control panel or the need for a full repair due to a water leak. Check the wiring and make sure that it is dry at all times.
You may also try contacting the company to try and get the error code resolved. You can try calling the company to get the customer service number or going to their website to get more help. You will need to send a detailed message to the company's customer service department with the error message that you received. You will be guided by them on what to do to fix the error and may be offered a second solution.
Have you found a solution yourself, but it is not in the list? Share your solution in the comments below.