Electrolux is a Swedish company that is known for being one of the largest appliance manufacturers in the world. The company was founded in Stockholm, Sweden, in 1919.
Electrolux manufactures and sells a variety of different appliances, such as ovens, refrigerators, dishwashers, ranges, and other home appliances. The company also offers products such as dryers, washing machines and dryers, washers and dryers, and more.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
On this page, you will find more information about the most common causes and most relevant solutions for the AC error 'P3'. Do you need help straight away? Visit our support page.
The Electrolux documentation indicates that error code 'P3' is caused by the following problem: "Compressor Medium Frequency-Test State".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this AC problem yourself. Do you need more help? Visit our support page if you need professional support with AC right away.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
If you encounter an error while using your Electrolux product or if you encounter problems with your appliance’s features or performance, then you might encounter an error code on your device’s screen.
These errors can occur when there is an issue with your device or it can occur when there is an issue with your power supply. Sometimes, common device errors or server problems can also cause this error.
To fix this error, you need to try a few solutions.
First, turn off the power to the machine, and when it is off, pull it out onto the floor and clean it. Disconnect all the power cables that are connecting the machine to the floor and clean all the wiring. Then, put the machine back together and run it again.
You will need to take out the power cables and clean the circuit boards. Then, put the rig back together and test it. Take off the protective covers and remove the screws that hold the connectors to the circuit board.
Clean all the parts thoroughly with a toothbrush and then call customer service. You can clean the parts using a damp cloth and a regular toothbrush. Then, call customer service. They will tell you what to do to get the error fixed.
Second, pay attention to the areas where the wires are touching the machine. Check the areas where the wires are touching the machine.
You must remove any corrosive materials that are in the machine. Now, place the car in the slot and run it.
Third, check the connections between the wires and the circuit boards. Look carefully at the wires because there might be some signs that they are fraying or that they are touching the machine frame.
If there are any signs that the wires may break, call customer service.
Fourth, a Duff connection may cause a problem with one of the circuit boards. When you power off the machine, drag it out onto the floor and remove the plastic covers.
Then, disconnect the power cables and clean all the electrical components. Now, disconnect the power cables and clean the machine thoroughly with a damp cloth and a toothbrush. Then, call customer support.
They will tell you what you need to do to get the error fixed. You can also contact a technical support team to get the problem fixed.
Have you found a solution yourself, but it is not in the list? Share your solution in the comments below.