Godrej is a manufacturer of refrigerators, ovens, cooktops, washing machines, and other home appliances. It was established in 1897 and is based in Mumbai, India.
Godrej has a variety of different products such as air conditioners, TVs, TVs and LED TVs, LED TVs and LED TVs and refrigerators.
On this page, you will find more information about the most common causes and most relevant solutions for the AC error 'F6'. Do you need help straight away? Visit our support page.
The Godrej documentation indicates that error code 'F6' is caused by the following problem: "Lower running frequency due to cooling overloaded".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this AC problem yourself. Do you need more help? Visit our support page if you need professional support with AC right away.
If you are having issues with your Godrej product or if you encounter errors while using your home appliances, then you might encounter error code F6 on your device’s screen.
To fix this error, you need to try a few solutions.
Interchange the phase and neutral wire
Fix faulty small connector
A faulty small connector can cause this error code on your device’s screen. This can be caused by dirt or dust, which can build up in the small connector. To fix this error, you need to remove the dirt or dust from the small connector using a brush and a little bit of compressed air.
Check for faulty temperature sensor
This is the most common solution to fix this error code F6 when it is displayed on your home appliance’s screen. This can be caused by an electrical problem in the temperature sensor.
To fix this error, you need to replace the temperature sensor on your device’s circuit board with a new one.
Clean blocked filters and doors
If your home appliance is not working properly because of a blocked filter or door, then this can be caused by dust and dirt which is blocking the passage of air from the inside of your home appliance to the outside.
To clean blocked filters and doors, disconnect the cable connecting the wall socket to the main unit. Then, you need to remove all dust and dirt from your main unit using a brush and compressed air.
Replace the sensor resistor
If your home appliance is not working properly because of a faulty sensor resistor, then this can be caused by a short circuit. To replace the sensor resistor, disconnect the cable connecting the wall socket to the main unit.
Then, you need to remove the sensor resistor from your main unit using a screwdriver. Next, you need to insert it into your main unit’s circuit board using a new one.