Haier is a company that produces Chinese electronic products. It was founded on 26 December 1984. This is a company that is well-known and respected in China. Haier is the maker of a wide range of products, including televisions, air conditioners, washing machines, refrigerators and other home appliances. The company is well-known for its energy-efficient products, and they have been featured in many films and TV shows.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
On this page, you will find more information about the most common causes and most relevant solutions for the Dishwasher error 'E6'. Do you need help straight away? Visit our support page.
The Haier documentation indicates that error code 'E6' is caused by the following problem: "Open-circuit failure of thermistor".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this Dishwasher problem yourself. Do you need more help? Visit our support page if you need professional support with Dishwasher right away.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
In spite of that, when you try to use the products from here, there are some problems that you can experience. The most common problem is the Haier-E6. If this happens, you will get this error when you try to access the product information or when you try to use the refrigerator. This product is capable of causing you to become very annoyed and frustrated. Because of this, you cannot use the product properly.
It is possible that your issue is caused by your product malfunctioning or it is possible that it is caused by a problem with your device. This is often the reason that you are not plugging the product into the right outlet. You might not know how to fix this error, so try out some solutions.
The code that is displayed on the Haier dishwasher E6 error code means that the flood protection device has been activated and the water supply will need to be turned off to prevent any more water from flowing into the dishwasher and leaking out.
In the test program, once the controller detects that the thermistor is open circuit, the e6 will occur. When E6 occurs, the drain pump will run until the flowmeter stays motionless for 2 minutes (if the model had the pressure switch (83/63), the drain pump would run until the pressure switch was reset and the flowmeter continued draining for 60 seconds.) The other components of the system will also be stopped immediately. The buzzer will be sounded for 30 seconds, and an error message will be displayed.
So, shut the water tap. Disconnect your appliance from the power supply.
Finally, you must call customer service in order that this problem can be corrected. You can also call their customer service number or visit their website to find out more. When you tell the customer support department that the message that you see is for someone to respond to, they will probably request you to send the message to that person. They will be able to tell you what to do next and how to solve this problem.
Have you found a solution yourself, but it is not in the list? Share your solution in the comments below.