Hotpoint is a dishwasher manufactured by Hotpoint. The dishwasher was released in 1911 and it was released in Ontario, California, United States. The dishwasher was introduced to provide an easier way to clean dishes without the use of knives and other tools.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
On this page, you will find more information about the most common causes and most relevant solutions for the Dishwasher error 'F15'. Do you need help straight away? Visit our support page.
The Hotpoint documentation indicates that error code 'F15' is caused by the following problem: "Virtual Sensor Reading between Wash pump and Drain pump not consistent".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this Dishwasher problem yourself. Do you need more help? Visit our support page if you need professional support with Dishwasher right away.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
If you are having issues with your Hotpoint F15 dishwasher or if you encounter errors while using your dishwasher, then you might encounter error code F15 on your device’s screen.
To fix this error, you need to try a few solutions.
Check for faulty water intake valve
This is one of the most common causes of this error. This can be caused by any small particles of dirt in the water intake. If you are having this problem, then you should check your water intake valve.
To do this, remove the top panel of your dishwasher and look for a small hose that goes to the water intake valve.
Make sure there is no water supply problem
You should check if there is any water leak or blockage in your water supply.
If there is a blockage, then you should clean it and unblock it to prevent any other problems from occurring. You should also check for any exposed wires that might be causing this error.
If you still have this problem, then you need to call a professional who can help you fix this issue quickly. The dishwasher manufacturer’s number is listed on the user manual of your dishwasher and your appliance’s side panel.
Clean any blocked hoses
This error can occur when there is a blockage in your water supply. This can be caused by any blockage in your water intake valve, clogged pipes, or other problems with your plumbing system.
If you are having this problem, then you should try to clean out any blockage in your water supply. You should turn off the breaker and check for any leaks or spills of water on the floor where your dishwasher is located.
Turn off the breaker and check for water leakage
If there is any water leakage, then you need to turn off the breaker again and call a professional who can help you fix this issue quickly. You should also clean out any blocked hoses or pipes if they are causing this error code to appear on your dishwasher’s screen.
Change the power supply
This error can occur when there is an issue with your power supply or when there is an issue with other electrical devices such as microwave ovens, coffee makers, humidifiers, and other appliances that use electricity to work properly.
If you are having this problem, change your power supply and see if it fixes the problem.
Have you found a solution yourself, but it is not in the list? Share your solution in the comments below.