iRobot is a company that is known for manufacturing home robots. It is known for making home robots such as the Roomba, Scooba and the 590lm. iRobot is available in the United States, Canada, Mexico, China and Australia.
The company was founded with the purpose of making smart household robots that can clean your house or help you with your chores. iRobot has been around since 1990 and it has become a household name. It has sold millions of units since its release.
The Roomba can be used to clean different surfaces such as carpets, hard floors and rugs. You can even use it to vacuum the floor or to mop your floors with ease. You can also use it to vacuum furniture or you can use it to sweep your floors using the cleaning pads provided by iRobot.
On this page, you will find more information about the most common causes and most relevant solutions for the Roomba error '18'. Do you need help straight away? Visit our support page.
The iRobot documentation indicates that error code '18' is caused by the following problem: "Cleaning is complete, but the robot was unable to dock onto the Home Base®".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this Roomba problem yourself. Do you need more help? Visit our support page if you need professional support with Roomba right away.
There are many errors that can occur when you try to use iRobot Roomba Error 18. This error occurs when you try to use the robot or when you try to connect it with your power cord or other settings. This error can be annoying and frustrating because you cannot use the robot properly.
The problem can be caused by a battery issue, a problem with the motor or a problem with the sensor. You might also encounter this error if you have other devices that are interfering with the proper functioning of iRobot Roomba Error 18. To fix this error, you need to try a few solutions.
Error 18 is commonly caused by the device unable to move the brushes properly or go back to the Home Base. This is because the device might have a problem with the motors or sensors. First, check the charging contacts on the device. If they are loose, you might need to use a pair of pliers to tighten them. Make sure that the contacts are tight enough so that they cannot come off.
Remove any debris that might be present on the contacts. Make sure that there are no objects on your floor surface. If you see any dirt, hair, or any obstacles, remove them first before trying to use iRobot Roomba Error 18 again and ensure it can go back to the Home Base. Test the room lockup sensor to make sure that it is working properly.
Check if there are any obstructions in front of the sensor or on top of it so that it can pick up its signal properly. If there are any objects blocking its signal, remove them first. You can also open the front panel of the robot to check if there are any obstructions and clean manually. If you still have issues with the program, then you can contact iRobot Customer Support. The iRobot Customer Support team can help you find a solution for the problem.