Kyocera has launched a number of smartphones and printers that are suitable for businesses. There are other accessories that you can use to improve the performance of your devices.
There are several types of errors that you can get when trying to use one of their devices. One of the most common problems is that kyocera sends a message to the user with the message “c0800”. Lots of people are experiencing this error when they try to print something, send an email or fax something to someone.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
On this page, you will find more information about the most common causes and most relevant solutions for the Printer error 'C0800'. Do you need help straight away? Visit our support page.
The Kyocera documentation indicates that error code 'C0800' is caused by the following problem: "Image processing problem JAM05 is detected twice".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this Printer problem yourself. Do you need more help? Visit our support page if you need professional support with Printer right away.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
One possible explanation would be that there is a scanning to email issue. This is a very annoying and frustrating error that can cause you to not send an email or fax correctly. That is, your problem might be caused by a problem with your device, or it could be an issue with your internet connection. Sometimes, there is a virus that blocks you from sending emails properly. Generally, it is necessary to perform a few troubleshooting steps to fix this error.
First, this error typically shows that the image processing problem JAM05 was detected twice. This is a result of a defective main PWB. So, replace the main PWB and check that it is still operating correctly. Do not forget to connect the connectors on the main PWB. If the wires are pinched by the other part or if they have been damaged, repair or replace them. When the issue is not resolved, you should change the PWB from the main page.
Another way to resolve this is to reset the unit. Enter the code '10871087' from the keypad. Your network should now be in maintenance mode. Enter the code “163” and press the “start or print” key. At some point you should see a screen that says ‘execute.’. Cursor or highlight. Press the Start/Print key. Then it will turn off again and come back to being ready. If that is no the case, then you must replace the fixing unit.
As for the last step, you can call customer service and ask them to fix the problem. You can also call the customer service number or visit their website to make a request. When you report to one of our customer support departments that there is something wrong with your screen, they will often ask for the code that you sent to them. That will allow them to tell you what action you should take, and what kind of solution you should approach.
Have you found a solution yourself, but it is not in the list? Share your solution in the comments below.