Kyocera Printer error Send SMB Error 2101

Many people have problems using their printer and their computers, such as a printer that says Send SMB error 2101. If you try to send a fax or a fax to someone, the printer will not let you sign in and print the document that the other person has requested. When you get an error message like that, you are not able to send an email or a fax to people as you should.

It may be that something is wrong with your device or that you are having some kind of problem with your connection. If you are getting an error message like this, try the following suggestions:

If the printer is getting this error message, it is likely that the network cable is disconnected or the hub that it is connected to is not working properly. Check the network cable and the computer hub for problems.

If that does not work, the SMTP server name or the host name of the SMTP server is not set correctly. Try using Command Center to set these items correctly. If that does not work, try using Command Center to specify the SMTP server name and the host name correctly.

If you receive no response when you try to print something from your Kyocera printer to your computer, check the cable that runs from the printer to the computer. Remove the cables that run from the printer to the computer, and then reseat them carefully. If that still does not work, power down both your computer and the printer, then power up the printer, and wait for it to come to a ready mode before you send a job. If it does not work, restart the computer and try to send the print job again.

Lift the top cover of your Kyocera multifunction printer to access the scanner. Spray light water on the glass to clean the inside of the glass. Spray the glass surface with a non-abrasive cleaner and wash the area with a soft cloth. Use a cotton swab dipped in water to clean the area where the glass is and also to clean the dirty spots that are on the surface of the glass.

If you have ink cartridges that are still functioning, make sure that you clean them thoroughly. Dip the top of each cartridge in a bowl that contains a few inches of warm, but not very hot, water. Dry the cartridges thoroughly using a clean, soft cloth. If possible, clean the ink cartridges by putting a cotton swab in warm water or isopropyl alcohol on them.

You should also try to contact the manufacturer of the printer to see if they have a solution for this error message. Try calling the customer service department or visiting their website. Eventually, the company will send an error message to their customer service department. The customer service representative can help you by telling them what you should do to fix the problem and will give you another solution.