The Lloyd is a smart home system that is available in different price ranges. The Lloyd features an intelligent assistant, voice recognition, and other smart home technologies.
The Lloyd is compatible with several devices, such as speakers, lights, cameras, and other smart home products.
On this page, you will find more information about the most common causes and most relevant solutions for the AC error 'E6'. Do you need help straight away? Visit our support page.
The Lloyd documentation indicates that error code 'E6' is caused by the following problem: "Outdoor malfunction LED 1, LED 2, LED 3, LED 4 : Flashing".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this AC problem yourself. Do you need more help? Visit our support page if you need professional support with AC right away.
If you are having issues with your Lloyd device or if you encounter errors while using your smart home system, then you might encounter the error code Lloyd e6 on your device’s screen.
To fix this error, you need to try a few solutions.
Check for high or low voltages
You can check for high or low voltages on your Lloyd device. To do this, you need to power the device off and then turn it back on. Next, you need to turn the Lloyd device back on and wait for about 15 seconds.
After this, you need to press the home button on your Lloyd device.
This will trigger a blue light on your Lloyd device. If the blue light is not flashing, it means there is no voltage at all. This can be caused by a faulty power supply or damaged wiring in your home.
Check for faulty temperature sensor
To check for faulty temperature sensors, you need to open up your Lloyd device and replace the faulty temperature sensor with a new one.
The faulty temperature sensor can be found inside your Lloyd unit.
After removing the screws, you will find a small metal plate with sensors attached to it.
Check and fix any outdoor malfunction
To check and fix any outdoor malfunction, you need to turn off your Lloyd device. Next, you need to unplug your Lloyd device from the power source.
Then, you need to disconnect the Lloyd device from any wires that they connect it to. After this, you can remove the Lloyd unit from its position and take it outside.
Once outside, you will need to test your Lloyd unit by pressing and holding down the home button on your Lloyd unit for about 20 seconds.
Check and fix the water leakage problem
To check and fix the water leakage problem, you need to unplug your Lloyd device from the power source and then remove all of its screws.
Next, remove all of its parts, including any fan or pump components that are attached to it.
After removing these components, you will access the circuit board inside of your Lloyd unit which will allow you to inspect for leaks or damages on this circuit board.
Replace the compressor
If the Lloyd device’s wiring or its power supply is damaged then you can replace the compressor on your Lloyd device. This will allow you to fix this issue by replacing the compressor on your Lloyd device.