Lloyd p3 is a subsidiary of Lloyd, which is an international technology company that develops and manufactures products for the energy, power, and aerospace industries. Lloyd-p3 was established in 1956 in India.
Different industrial companies use the products manufactured by Lloyd-p3 all over the world. The company also sells these products to other companies, such as global airports and train stations.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
On this page, you will find more information about the most common causes and most relevant solutions for the AC error 'P3'. Do you need help straight away? Visit our support page.
The Lloyd documentation indicates that error code 'P3' is caused by the following problem: "Lack of gas in the system or the pcb is miscalculating the gas pressure".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this AC problem yourself. Do you need more help? Visit our support page if you need professional support with AC right away.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
If you encounter errors while using your Lloyds product or if you encounter errors while using your tablet or computer, then you might encounter the error code Lloyd-p3 on your device’s screen.
To fix this error, you need to try a few solutions.
Check for high or low voltages
To check for high or low voltages, first, turn off your device and unplug it from the power source. Now, try turning on your device. If the error code Lloyd p3 still appears on your screen, then you need to check for high or low voltages.
To check for high voltage, first, make sure that you plug the power source in, and then use a multimeter to measure the voltage. If the voltage is too high or too low, then you need to replace your power supply.
Check for faulty temperature sensor
If your temperature sensor is damaged, then this error can occur when you try to start up your device or use it in different weather. To fix this error, first, remove all dust from your device’s interior.
If the error still occurs after you have cleaned all the debris off of your device’s interior, then you need to replace your temperature sensor.
Check and fix the water leakage problem
If your water leakage problem is causing this error code Lloyd-p3 on your screen, then first unplug your device from the power source. Next, remove any dust or debris that might be stuck in your device’s vents. Next, make sure that all the holes in your case are clean.
Then, you need to make sure that there is no dirt or dust inside of the holes in your case. If there is dirt or dust inside of these holes, then you need to replace these holes with new ones.
Replace the compressor
If your compressor is damaged or defective, then this error can occur when you try to start up your device or use it in different weather. To fix this error, first, unplug your device from the power source.
Next, remove any dust or debris that might be stuck in your device’s vents. Then, use a can of compressed air to blow out any debris or dust that might be stuck inside your device’s vents.
If the error still occurs after you have cleaned all the debris out of your device’s vents, then you need to replace your compressor.
Have you found a solution yourself, but it is not in the list? Share your solution in the comments below.