Midea is a company that is based in China but produces home appliances. They are one of the largest manufacturers in the world. Midea was founded in 1968 in Beijiaozhen, Foshan, China. Midea is a large manufacturer of many types of home appliances, including refrigerators, stoves, dishwashers, washers and dryers.
Midea is a Chinese company that manufactures various home appliances and has factories in more than 20 countries around the world. Midea has also set up a website where you can place your orders for their products.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
On this page, you will find more information about the most common causes and most relevant solutions for the Washer & Dryer error 'E2'. Do you need help straight away? Visit our support page.
The Midea documentation indicates that error code 'E2' is caused by the following problem: "Alarm for water drain has not finished Check if water drain hose is placed correctly Clean the stem".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this Washer & Dryer problem yourself. Do you need more help? Visit our support page if you need professional support with Washer & Dryer right away.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
It is possible that some problems with your mobile device may occur or that your home appliances may encounter issues. It is possible that you will have errors such as the following error code: E2 on the screen of your device. It may be that your gadget is malfunctioning or that your power supply has failed to work correctly. If this happens to you, it could be that a common device or a server problem is causing the error. You may need to do a few troubleshooting steps to get rid of the error.
This error code may indicate that there is a zero-crossing error in the control signals. If that happens, you will have to turn off your device and get someone to check the power supply. You need to unplug the device in order to prevent it from doing such things again. To fix it, you will need to clean the blower properly or if it is damaged, you will have to get a new blower.
If it does not happen, you need the INLET/MOTOR/DRAIN valve to open and allow the appropriate function to be driven from the water flow to the drum and drain valve to open to let water out at the end of the program cycle. If that fails, you must check the voltage at the valve/motor/pump and if that fails, there is no power coming from the controller.
Check that if any of the cycles fails to perform the specified action, the fault will be in the command that you enter and the executing device that is causing the fault will be the executing device, such as the valve or the motor or the pump.
You can also try calling customer service in order to have them fix the error. When someone from their customer support department sees that there is an error message that appears on their screen, the person will ask you to send an email to them explaining what has happened. When you are done doing that, it will give you a good idea of what you should do to get the problem fixed.
Have you found a solution yourself, but it is not in the list? Share your solution in the comments below.