Miele is a brand of washing machines that are manufactured by the Miele company. They were founded in 1899 and are based in Gütersloh, Germany. Miele washing machines are well known for their high quality features and they are known for being reliable.
Miele dishwashers are reliable. They are almost always working properly. But sometimes you will encounter an error code when you are trying to use your dishwasher. Sometimes error codes will occur during the cleaning or when you are washing dishes. It is frustrating to be stuck with this error and not be able to complete your task properly. It can be annoying and frustrating to not be able to finish your washing task properly
On this page, you will find more information about the most common causes and most relevant solutions for the Dishwasher error 'F51'. Do you need help straight away? Visit our support page.
The Miele documentation indicates that error code 'F51' is caused by the following problem: "Heater pressure switch".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this Dishwasher problem yourself. Do you need more help? Visit our support page if you need professional support with Dishwasher right away.
It is possible that a faulty appliance is causing you to experience this error. It can also be caused by a problem with your water supply or the power supply that you are using in your home. Sometimes, common device errors or server problems can cause you to not be able to use the washer properly. You might be facing this error if you are using other applications that are interfering with the proper functioning of your dishwasher. There are a few things that you can do in order to fix this error.
Miele – F51 means that the pressure switch is defective. Pressure switch on a Miele dishwasher is located at the drain. It is supposed to detect when there is water in the tub. It is usually used to check whether there is water in the tub or not.
F51 fault means that the water heater relay is faulty but it could also mean that the water pump is jammed up. It is possible to replace the relay easily if it is faulty. You might need to connect a meter to each of the pressure switch terminals. If there is no water in the bathtub, the pump is probably blocked.
You might have to trip the circuit breaker or disconnect the power cord for a while to see if your appliance is faulty. Check to see if there are blockages in your drain system. Technicians can test the pressure switch by bypassing it.
You can also try calling customer service in order to get the error message fixed. If you call them at 1-800-869-8987, you are allowed to visit their website. If you are getting an error message when you try to call one of their customer service departments, that department will normally ask you to send the error message to them. When you finish doing that, you will know what type of problem you should approach.