Onida is a device that is used to provide electricity to your home. It is known for being a high-quality and affordable energy-saving device. This device can be used in homes and it can be used in businesses as well. This device has a variety of different features such as wireless control, remote control, monitor, and timer functions.
The Onida is designed to save energy by switching off the power supply when there is no need for it.
On this page, you will find more information about the most common causes and most relevant solutions for the AC error 'E4'. Do you need help straight away? Visit our support page.
The Onida documentation indicates that error code 'E4' is caused by the following problem: "Discharge temp protection of compressor".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this AC problem yourself. Do you need more help? Visit our support page if you need professional support with AC right away.
If you are having issues with your Onida or if you encounter errors while using this device, then you might encounter error code 4 on your screen. This error can occur when there is an issue with your device or it can occur when there is an issue with your power supply.
Sometimes, common device errors or server problems can also cause this error.
To fix this error, you need to try a few solutions.
One possible solution you can try is to check the return signal wire of the AC motor unit. To do this, you need to remove the motor unit from the unit and connect a wire from the motor unit to the PCB card of the indoor unit. If you find that this error is not fixed, then you can try to replace your compressor.
You can try removing your indoor unit and replacing it with a new one.
If this error is still not fixed, then you can also try replacing your relay running capacitor. To do this, you need to remove your PCB card and locate the relay running capacitor on it. To replace it, first, remove the old capacitor and then insert a new one in its place.
After that, reconnect your PCB card back onto your indoor unit and see if this error is fixed or not.
If there are still no results after trying these solutions, then you can also try replacing your relay running capacitor with a new one. To do this, first, locate the relay running capacitor on your PCB card and then replace it with a new one.
After that, reconnect all wires back onto their respective places on your PCB card and check if this error is still present or not.
These solutions should work to fix the error code on your AC unit. However, if the problem persists, consider contacting Onida customer support for further assistance on the issue.