Sharp is a company that produces high quality televisions and other home appliances. They also provide good support and assistance to customers. Sharp products are known for having a good design and being affordable. They also have a good reputation for being good quality and being affordable.
Sharp is known for making high quality televisions. They have been manufacturing quality TVs for many years. Sharp has been manufacturing LCD TVs for a long time and they have always been well known for producing quality products.
On this page, you will find more information about the most common causes and most relevant solutions for the Washer & Dryer error 'E1'. Do you need help straight away? Visit our support page.
The Sharp documentation indicates that error code 'E1' is caused by the following problem: "Low flow at the faucet, the faucet is closed or water inlet filter net is blocked".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this Washer & Dryer problem yourself. Do you need more help? Visit our support page if you need professional support with Washer & Dryer right away.
Increase water supply, press START / PAUSE key. Clean filter net, press START/PAUSE key.
Do you still have problems with this error? Try one of the quick fixes below or leave a comment.
Sharp has a reputation for producing good products, but some people have encountered Sharp E1 errors.
This is a typical error that indicates that a suction thermistor has been short circuited. Unplug the power cord from the power source and restart the unit again. Find and hold down the Mode button on the unit's control panel and push it down. This causes the unit to run normally. Holding down the Mode button for approximately three seconds, plug the unit back into the power supply. After waiting three seconds, the unit should restart normally. Wait until the unit beeps for approximately three seconds before you press the Mode button. When the unit beeps for approximately three seconds, stop pushing the Mode button.
If you let go of the Mode button, your unit should start functioning normally; however, you must press the Power button to stop the unit. Push the button again to start the unit; this time, press the button again to begin operating the unit. You should get a reset message indicating that everything has been reset successfully and it should now function normally.
If the E1 error code indicates that it is time to change the air filter, then disconnect the power and clean the filter. If you get an E1 error code because some of the buttons on your control panel are dirty or stuck or are wet and are not functioning properly, disconnect power to your unit and try cleaning and drying them with a compressed air can.
You may need to contact Sharp customer support in order to get a solution for this error. When you call their customer service number, they will allow you to access their website. If someone in their customer support department warns you that there is an error message that appears on your screen, that person will then ask you to send the error message to them. When you finish doing that, it will give you a good idea of what kind of solution you should approach.