Smeg is a manufacturer of refrigerators and other home appliances. Smeg is a company based in Switzerland. It was founded in 1948. Smeg makes products for both professional and home kitchens. Smeg is a company that makes home appliances, including refrigerators, freezers, cooktops, ovens, microwaves, and dishwashers.
On this page, you will find more information about the most common causes and most relevant solutions for the Washer & Dryer error 'E12'. Do you need help straight away? Visit our support page.
The SMEG documentation indicates that error code 'E12' is caused by the following problem: "Tachometer".
Do you think there is another cause for this error? Let others know in the comments.
We've created a list of solutions which you can follow if you want to solve this Washer & Dryer problem yourself. Do you need more help? Visit our support page if you need professional support with Washer & Dryer right away.
If you have problems with any of your Smeg products, or if you are having problems using your home appliances, you may experience error code E12 on your screen. This error code is displayed if something is wrong with your device or if there is an issue with your power supply. Sometimes, common errors on your devices or on your server can cause this error.
If you encounter this error, you will need to try a few solutions.
This error means that the motor has throttle issues. It may also be caused by something that is not compatible with your device. This error message means that the motor is not responding as it should. It can also be caused by the PCB and the tachometer not reading the correct timing of the motor.
Check the condition of the motor. Check the toggle and the connection to the control module. Check the tacho on the motor to ensure that it is not reading the wrong signal. Then, check all connections to the motor and all the blocks that support it. Also check the connections that are made to the main control module of the device. Check for any leaks or spills that may occur.
If the thermostat is in good condition, make sure that the heating element in the vat is working correctly and that the control switch on the heating element is working properly.
Open and close the door. Check the condition of the switch that detects whether the door is closed or not. Check that the door is closed when you are preparing to run a cycle.
Check the connections to the water drain; make sure that they are at the correct height and that there are no restrictions on the length of the drain hoses that you are using.
Do not force the door open while you are running a programmed cycle on your appliance; always use the buttons that are provided to stop a cycle and open the door.
Lastly, if you cannot fix this error, you can try contacting the Smeg Customer Service. The Smeg Customer Service will help you get help from them. You can try calling them on their customer service number or going through their website. Customer support will ask you to send them the error message that is appearing on your screen. They will advise you what you should do to fix the problem or give you another solution.