Error codes for Brother Sewing Machines

Brother is a company that produces a wide range of sewing machines from NEXIO. It has been in the market for some time and has produced many great products. Its brand name is known all over the world and is one of the most trusted brands. There are several models of Brother Sewing Machines available in the market today. These models have different features and specifications that are suitable for different uses.

This brand is one of the best in the market and its products are known for their high quality and performance. You can trust this brand to produce quality products that will give you the best results. The company has always been improving its products and providing new models that are designed to meet the demands of different users. You can call the customer services anytime you want and they will be able to provide you with all the information that you need about their products.

However, there are also some common issues that homeowners have with their Brother Sewing Machines that can lead to inconvenient situations and even expensive repairs. The purpose of this article is to provide a comprehensive guide on how to identify these common issues so that you can be able to solve them quickly and effectively. Let’s check out some of the common problems and their possible solutions.


When a button that is not pressed is pressed and the presser foot is raised, this message is displayed.

Lower the lever to allow for more power before continuing the operation.


This is what you will see when you press the start/stop button while the foot controller is connected.

Disconnect the foot controller, and press the button that says start/stop. If not, you should still use the foot controller to operate the machine.


This message will be displayed if the sewing speed controller is set to control the zigzag stitch width and if the button for starting and stopping is pressed.

Do not turn off the width control, and use the foot controller to operate the machine.


When you turn on your twin needle, and you select a stitch pattern that cannot be sewn with the twin needle.

Switch to single needle mode. Replace the twin needle with a single needle before you continue the operation.


This message is displayed on the needle when you try to sew with a stitch that is different from a straight stitch (middle needle position) and while the straight stitch needle plate is installed.

Turn off the machine, and then replace the needle plate before you start the work.


This is a message that will be displayed when the needle plate cover is removed while the machine is still turned on.

Turn off the machine and attach the needle plate cover, and then go ahead and continue working.


If there is a message that says ‘f*’ on the LCD while the machine is being used, it is possible that the machine is malfunctioning. The message will be replaced by a number.

(Visited 4 times, 1 visits today)


  • No comments yet.
  • Add a comment