Error codes for Trane Furnace
Trane Furnace is a furnace brand that is known for being a quality brand that produces quality products. The company was founded in 1885, and it is located in La Crosse, Wisconsin.
Trane Furnace products are available through different retailers such as Home Depot, Lowes and Sears. Trane Furnace offers several different models of furnaces including the Trane iQ Series and the Trane Smart Series.
These models of furnaces are available in different price ranges and they are also known for being energy-efficient appliances.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
13
If you are having issues with your Trane product or if you encounter errors while using your home appliances, then you might encounter error code 13 on your device’s screen.
This error can occur when there is an issue with your device, or it can occur when there is an issue with your power supply. Sometimes, common device errors can also cause this error.
Gradually Blazing Light
Another error you can find is a gradually blazing light. Gradually blazing light demonstrates that your Trane heater is feeling completely fine and is holding up for a flag from the indoor regulator to begin operating.
However, on the off chance that you’ve now raised the temperature, but the heater is unresponsive, at that point such a gradually blazing light can become an issue.
When a heater isn’t responding to the indoor regulator, these are many things that you just can do. First, you can change the air filter. One of the foremost common issues for any furnace-related issue may be a clogged channel.
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
If the wind current is confined, the exchanger might overheat and close the full framework down.
You can also check the thermostat. The gadget should be set to ‘heat’, it ought to be appropriately joined to the divider, and you shouldn’t be able to see any free or frayed wires.
Also, make sure that the time and date are correct, and also the batteries still have power. Review the circuit breaker and check the board for any free or harmed wires. The combine could be stumbled or blown, so do check that as well.
Rapid Flashing Light
If you find a rapidly flashing light, this implies that your unit is on which it’s giving a call for warmth, so everything ought to be fine.
However, in the event that the heater is calling for warmth all the time, this might show that the unit isn’t reacting to the indoor regulator. If so, you can do the same instructions above.
In the event that the heater light remains on, no matter what you are doing at that point, there’s an issue with the control board, and you probably have to replace it. Meanwhile if it keeps turning off, check your power source.
In case that didn’t offer assistance, find the breaker board and the circuit that controls the board. The circuit breaker might have stumbled. In such a case, the switch would be either within the ‘off’ or the center position.
You can also try to check the heater switch that’s ordinarily found on the unit or on the wall right next to the heater. The switch ought to be within the ‘on’ position.
Those are some examples of error codes you might find when using Trane Furnace. If a problem persists, you can contact customer service to fix your problem.
